It has come to our attention that there may be some confusion over the definition of a headsail/spinnaker, where the half width is around 75% of the foot/LP.

The relevant IRC rule is 26.3.4:

26.3.4 RRS 50.4 shall not apply.

A headsail is defined as a sail tacked down forward of the foremost mast with half width (measured as a headsail) not exceeding 75% of LP. Any other sail set forward of the foremost mast is a spinnaker and shall have half width (measured as a spinnaker) greater than 75% of foot.

The rule applies in the order it is written. Therefore:

  • If the sail satisfies the definition of a headsail (ie. HHW not exceeding 75% of LP)
    then it rates as a HEADSAIL.

  • If the sail does NOT satisfy the definition of a headsail then it rates as a SPINNAKER, and then the SHW must be at least 75% of SF.

As an example, for the following sail:


Measured as a headsail:
LL 15.90
LP 8.47
HHW 6.00 (71% of LP)

Measured as a spinnaker:
SLU 15.90
SLE 14.90
SF 8.91
SHW 6.70 (75.1% of SF)

When measured as a headsail, HHW is less than 75% of LP. This sail therefore rates as a HEADSAIL. It is then irrelevant whether it complies with the spinnaker definition or not.

If you have any queries on this, please get in touch with This email address is being protected from spambots. You need JavaScript enabled to view it. or This email address is being protected from spambots. You need JavaScript enabled to view it. at the RORC Rating Office, tel 01590 677030.

Can't find the answer?

If you cannot find the answer to your question, please contact the RORC Rating Office info@rorcrating.com
To report broken links on this site contact webmaster@ircrating.org

Header images by:

John Crawley (CAN IRC)  
Jinno (c/o JPN IRC)
 
 
 
Back to top