Headsail HUW default size

Those of you revalidating your 2012 certificate for 2013 will have noted that it is acceptable to use a default HUW (Headsail Upper 7/8 Width) for existing headsails. The default size depends on the overlap of the headsail, and is related to the HTW (Headsail 3/4 Width), and is calculated as follows:

For overlapping headsails with LP/J greater than 1.10, the default is HTW x 0.50.

For nonā€overlapping headsails with LP/J 1.10 or smaller, the default is HTW x 0.56.

These default sizes are based on actual measured data for a significant number of sails, and any variation from the default will have a very small effect on rating.

For all newly measured sails we now need the HUW to be declared.

Can't find the answer?

If you cannot find the answer to your question, please contact the RORC Rating Office info@rorcrating.com
To report broken links on this site contact webmaster@ircrating.org

Header images by:

John Crawley (CAN IRC)  
Jinno (c/o JPN IRC)
 
 
 
Back to top